How to maintain the dust collector

How to maintain the dust collector? This is a very important question. Below, the editor will introduce how to use a vacuum cleaner and maintain it correctly.

1. There are various types of dust removal equipment, with different models, specifications, structural performance, and functional characteristics. Please read the instructions carefully before use to avoid damaging the industrial vacuum cleaner and endangering the safety of the user due to improper use.

2. The ambient temperature of ordinary industrial vacuum cleaners should not exceed 40 degrees, the workplace should not be above 1000 meters above sea level, and there should be good ventilation. Air, flammable gases, and corrosive gases should not be used in dry indoor environments.

3. Dry dust removal equipment is not allowed to absorb water, and the vacuum cleaner cannot be operated with wet hands. If it is necessary to clean large paper balls, plastic cloth or waste larger than the diameter of the straw, they should be removed in advance, otherwise it is easy to clog the straw. When industrial vacuum cleaners absorb liquid substances, please remove the filter element and pay attention to draining the liquid in a timely manner.

4. Connect the ground wire to ensure electrical safety. Ordinary industrial vacuum cleaners should work continuously for no more than 8 hours at a time, mainly to prevent the motor from overheating and burning. There are also specially designed industrial vacuum cleaners, which can work continuously for 36 hours without stopping due to their special cooling system, and can be used together with machine tools.

5. When using an industrial vacuum cleaner equipped with an automatic winding device, please unplug the power cord for full use and do not pull or tug on the power cord. If you see a yellow or red mark on the power cord, you must immediately stop unplugging it to prevent pulling the power cord too far. If you need to retract the power cord, press the button to automatically retract the power cord.

6. Do not excessively extend or bend the industrial vacuum cleaner hose, and do not frequently fold it, as this can affect the lifespan of the industrial vacuum cleaner hose.

7. Check if the power plug and power cord of the dust collector are damaged, as leaks can burn out the motor of the industrial vacuum cleaner.

8. Be careful not to hit the dust collector to avoid damaging the barrel of the industrial vacuum cleaner and reducing its suction power.

9. When not in use, please place the machine in a well ventilated and dry place. For industrial vacuum cleaners that do not support long-term continuous operation, the continuous working time should be controlled within the working time supported by the industrial vacuum cleaner. Do not overwork, otherwise it will affect the service life of industrial vacuum cleaners.

10. If the main body of the dust removal equipment is very hot, has a burning smell, or the industrial vacuum cleaner shakes and buzzes abnormally, it should be turned off and repaired immediately, and the industrial vacuum cleaner should not be overloaded.

The above is about how to maintain the dust collector. I hope it can be helpful to everyone. Thank you for your attention and support. See you in the next issue!