Issues to be noted in the application of stone removal machines

In the processing technology of wheat production and processing, the application of stone removal machines is inevitable. What issues should be noted in the application? The editor has summarized the following content for everyone:

1. Independent wind net

The stone removal machine mainly relies on the action of wind to classify sand and wheat. The height of wind and air pressure in stone removal tools will immediately impair their actual effectiveness. Therefore, the stone removal machine must be equipped with an independent windproof net according to the user manual. Choose a suitable centrifugal fan to ensure it has stable and sufficient exhaust volume and air pressure.

2. The situation where the sieve powder is severely damaged

After long-term use, the surface of the sieve can be polished with hand woven wavy patterns, making it easy for gravel to flow down and flip over on the sieve surface. Jumping up is difficult and cannot be discharged, make sure to remove the stone sieve powder at this time.

3. Sealing condition of machine equipment connections

Conductive soft connections are installed on the feed inlet and air duct. Once damaged, the exhaust volume and air pressure in the machine will become unstable, which will immediately impair the actual effectiveness of the stone removal agent. Ensure immediate removal and replacement of the conductive soft connection.

4. Is the circular mesh clogged

At this stage, most of the screening powder for the stone removal machine is hand woven stainless steel mesh. After long-term use, residues such as steel nails and broken fine iron wires will be buried in the stainless steel sieve, blocking the circular hole sieve and damaging the actual effect of stone removal. It is recommended to install mineral processing equipment above the entrance of the stone removal machine.

5. The tilt angle of the screen surface should be moderate

If the inclination angle of the sieve body is too large, the gravel will be difficult to climb uphill, and the stone discharge section will become longer. Some gravel will flow into the wheat inlet and outlet along with the wheat flow, which will reduce the efficiency of stone removal. On the contrary, if the inclination angle of the sieve body is small, the gravel will help to rise, and higher quality barley will also climb to the stone discharge outlet. Therefore, the inclination angle of the sieve surface has a particularly important impact on the actual effectiveness of stone removal.

The above are the issues that should be noted in the application of stone removal machines. Thank you for your attention and support. If you want to learn more, please follow the official website of Yongming Machinery. See you in the next issue!