The correct function method of cyclone dust collector

The cyclone dust collector is a kind of dust removal equipment, and it is also one of the dust collectors widely used in applications. It can be used alone or in series. The cyclone dust collector has simple structure, relatively cheap cost, space saving, more convenient maintenance, and is suitable for dust removal in various industries. It can capture dry non-fiber particles and can be recycled. However, when it comes to any equipment here must have the correct use method, not following the correct use method will lead to one kind of problem or another. Let's take a look at the summary of the main points of the cyclone dust collector.

Correct operation when using cyclone dust collector:

1. Close the small baffle valve, start the ventilator, and gradually open the large baffle valve after there is no abnormality, so that the dust collector can pass the specified amount of dust-containing gas.

2. Pay attention to the changes of the easily worn parts such as the inner wall of the outer cylinder.

3. Preparations before starting the cyclone dust collector.

4. Check whether the connecting piece is firmly connected.

5. Check the air tightness, ash leakage and air leakage of the cyclone dust collector and flue, dust collector and ash hopper, ash hopper and ash discharge device, ash conveying device and other assemblies.

Pay attention to whether the air tightness of each part of the cyclone dust collector is good, and always check the changes in the gas flow and dust concentration in the cyclone tube. Cyclone dust collector should always pay attention to the changes of the easily worn parts such as the inner wall of the outer cylinder. When the temperature of the dust-containing gas changes or the humidity decreases, attention should be paid to the adhesion, blockage and corrosion of dust. Pay attention to changes in pressure and smoke exhaust. Because of wear and corrosion, the dust collector will perforate, causing dust, the efficiency of dust removal will be reduced, the color of exhaust smoke will be worse, and the pressure difference will change.

The above is the correct function method of the cyclone dust collector. I hope it will be helpful to you after reading. For more information about steel structure, please contact online or call our company's service hotline (in the upper right corner of the website) to provide you with suggestions, and we will be happy to provide you with quality service!