Main points of use and maintenance of the duplex concentrator

Since the introduction to the multi-selection machine, everyone must know what kind of function it is. Does anyone know how to maintain this kind of machine so that it can be used for a longer period of time. Then the editor will give you a detailed introduction, hopefully The maintenance advice can help everyone.

The multi-type selection machine has wide adaptability. It can select wheat, rice, corn, sorghum, beans, rape, pasture, green manure and other seeds by changing the sieve and adjusting the air volume.

The machine has high requirements for use and maintenance, and slight negligence will affect the quality of seed selection. The main points of the use and maintenance of the machine are as follows:

1. The selected machine is operated indoors, the parking place of the machine should be flat and solid, and the parking position should be considered convenient for dust removal.

2. If the conditions are limited, it is necessary to work outdoors. You should find a sheltered place to park and place the machine downwind to reduce the influence of wind on the selection effect. When the wind speed is greater than level 3, consider installing a wind barrier.

3. When changing varieties, be sure to remove the remaining seeds in the machine and keep the machine running for 5-10 minutes. At the same time, switch the front and rear volume adjustment handles several times to eliminate the excess in the front, middle, rear and deposition chambers. Seeds and impurities After confirming that there are no seeds and impurities flowing out of several storage chambers, the machine can be stopped, and the seeds and impurities on the upper sieve surface are first cleaned to the trash drain, and then the upper sieve surface is removed and cleaned. screen.

4. Before each operation, check whether the fastening screws of each part are loose, whether the rotation is flexible, whether there is any abnormal sound, and whether the tension of the transmission belt is appropriate.

5. Add oil to the lubrication points.

6. Cleaning and inspection should be carried out after each operation, and faults should be eliminated in time.

In this issue, the editor mainly explained to you the main points of the use and maintenance of the multiple selection machine. Do you understand it clearly? If you have any other questions, you can tell the editor. After finishing the news, the editor will meet with you in the next news issue. See you in the next issue~~