Use and maintenance of compound screening machine

The compound screening machine has wide adaptability. It can select wheat, rice, corn, sorghum, beans, rape, pasture and green manure seeds by changing the sieve and adjusting the air volume. The use and maintenance requirements of this machine are very high, and slight negligence will affect the quality of selection. The use and maintenance of the compound screening machine are as follows:

1. Operate the screening machine indoors as much as possible. The parking place of the machine should be level and firm, and consider the convenience of dust removal.

2. Before operation, please check whether the connecting screws of all components are tightened, whether the transmission components rotate flexibly, whether there are abnormal sounds and whether the tension of the transmission belt is proper.

3. When changing varieties during the operation, the remaining seeds in the machine should be cleaned and the machine should be kept running for 5-10 minutes. At the same time, the front and rear air volume adjustment handles are switched multiple times to remove the seeds and impurities remaining in the front, neutral and rear chambers. After confirming that there are no seeds and impurities flowing out of several storage rooms, the machine can be stopped. First clean the seeds and impurities from the surface of the screen to the sewage tank, and then clean the surface of the screen and the surface of the lower screen.

4. When the wind speed is higher than level 3, the windshield should be considered.

5. Before each operation of the duplex screening machine, the lubrication point should be oiled, cleaned and inspected, and the fault should be eliminated in time.

The above is the use and maintenance of the composite screening machine that I have shared with you. Welcome to call our company if you need the above-mentioned machine. Yongming Machinery looks forward to cooperating with you. See you next time!