Do you know the installation and use of vibrating feeders?

The vibrating feeder is an automatic feeding device that can effectively increase the production of granular materials and reduce the vibration of ordinary feeders.

The correct installation and operation of the vibrating feeder are crucial for the operation of the line. Therefore, when installing and using a vibrating feeder, the following issues should be considered:

1. The vibrating feeder used for batching must be set on a horizontal plane to ensure uniform and stable material transportation and prevent material self flow. For example, when the material is continuously loaded, the entire material may tilt by 10 degrees. For viscous materials and materials with high moisture content, a downward slope of 15 ° can be set.

After installation, the vibrating feeder should have a pitch breakthrough of 20 millimeters, be horizontal, and the suspension clutch must be flexible.

Before testing the inert vibration feeder, all screws must be tightened once, especially the base screws of the vibrator. After working continuously for 3-5 hours, turn it off again.

When the vibrating feeder is working, the amplitude, current, and surface temperature of the vibrating motor should be checked regularly. The vibrating feeder has uniform amplitude before and after, no left or right rotation, and stable vibration current. If there is any abnormality, stop immediately.

5. Lubrication of the vibrator bearings is crucial for the normal operation of the entire vibrating feeder. Bearings should be lubricated regularly during operation. Under high temperature conditions, the motor should be disassembled every two months, and the inner bearing should be replaced every six months.

Vibration conveyors are mainly used to transport bulk or granular materials under horizontal or low inclination conditions, with a particle size of no more than 74 μ m. They are widely used in metallurgy, coal, building materials, chemical industry, glass, power, machinery, grain and other industries to transport powdered and granular materials. The present invention has a simple structure, low power consumption, and low equipment operating costs; Less lubrication points, fewer vulnerable parts, and easy maintenance; The material is transported in a spray state, reducing the wear of the transport chute and allowing for the transportation of abrasives; There can also be multiple feeding points and multiple discharging points; Easy to transport materials such as dust, toxic and volatile gases in a sealed manner, which is beneficial for environmental protection.

Vibration conveyors can be divided into horizontal conveyors and vertical conveyors according to the direction of material transportation. Conveyor vibration can be divided into three modes: electromagnetic vibration, eccentric vibration, and connecting rod vibration.

The above is the sharing brought by the editor for everyone. We'll meet again next time.