How to properly use sunflower sheller

With the advancement of technology and the development of the economy, more and more users purchase flower shelling machines, but many users have not only caused the quality of the shelled products, but also the quality of the shelled shells. The efficiency of production and processing is very low, which seriously affects its economic benefits and social effectiveness. Below I introduce some successful experiences to facilitate the promotion of sunflower shelling equipment.

1. Use several prerequisites for the sunflower sheller

(1) When purchasing a sheller, choose a good brand of good performance, and it is difficult to guarantee the quality of the product of a small workshop. Requirements for the sheller:

        1 Clean and high productivity; for the de-lighting machine with selected devices, it is also required to have cleaner than the island.

        2 The loss rate is low and the breaking rate is small. High economic efficiency.

        3 structure single, reliable use, adjustment, power consumption is low

(2) Suitable for flowering and wetting: too high breaking rate and high temperature will affect work efficiency. The sunflowers stored in the countryside are too dry. When shelling, be sure to pay attention to the rate of the shell motor to ensure the rate of the whole kernel.

(3) The power supply voltage cannot be low. If the machine works normally, the voltage needs to reach its rated voltage. In rural areas, there is only one transformer in a village, and the farmers are dispersed. In addition, the wires and circuits used are not standard, so that the voltage is far from the transformer. Insufficient voltage affects the rate of shelling, and it is easy to shorten the equipment test.

2. Operation method and child care items

(1) Check if the fasteners are tightened before use. The rotating parts are flexible regardless of whether each bearing has grease or not, and whether the husking device is placed on a stable floor.

(2) Before use, check if the power voltage switch must be in the off position.

(3) After the motor is started, the steering of the rotor should be consistent with the direction indicated by the machine. First, idle for a few minutes, observe if there is abnormal noise, and confirm that the operation is normal before loading production.

(4) When the motor starts to increase, the air volume of the cyclone can be adjusted, and the air suction volume can be increased to achieve the purpose of exhausting the skin.

(5) When the kernel containing unopened kernels exceeds the standard, the angle of the vibration motor and the screen surface should be adjusted in time to improve the selection effect.

(6) When manufacturing, people should be farther away from the vibration motor to avoid hurting people.

(7) Equipment should always remove dirt on the surface of the sieve and residual grains and other debris. To ensure the selection of sunflower kernels. When the equipment is not in use, it must be covered and placed in a dry warehouse to avoid sun and rain.

The above is the correct use of the sunflower sheller shared by Xiaobian. I hope that friends who don’t know can learn more through Xiaobian’s sharing. For those who want to know more, please continue to pay attention to the official website of Yongming Machinery.

Reprint statement:

The article is reproduced on the Internet for the purpose of transmitting more information and does not imply endorsement of its views or verification of the authenticity of its content. If the reprinted works infringe the author's right to authorize, or have other damages such