How to quickly find the damaged bag in the pulse dust collector

How to quickly find the damaged bag in the pulse dust collector? The pulse dust collector is one of the more popular pulse dust collector devices in the factory. The faults of the machine are also various. The common one is the damage of the bag of the machine, and the phenomenon of air leakage and leakage. So what should I do if I encounter such a situation? The following small series tells you in detail how to find these broken bags.

If the pulse dust collector malfunctions, first determine the general position of the dust bag. After determining that the machine has failed, close the poppet valve of the clean air chamber, and then observe the discharge at the exit of the chimney to observe the concentration of the discharge. The concentration of the discharge at the outlet is reduced, and it is then possible to determine that the clean room has a broken bag.

When it is determined which clean air chamber has bag damage, the next step is to find the damaged bag. Enter the clean air chamber and take a flashlight from the various pockets in the clean air chamber. If you find that there is a lot of dust at the bottom of the bag, then the bag is likely to be a bad cloth bag. You must pay attention to the inspection process. Don't check one place to clean up. If it's so easy for you to identify a bad bag, the dusty one is the bad bag.

The above is how to find the way the pulse dust collector breaks the bag. This method is very practical. I hope the above description can help you.

Reprint statement:

The article is reproduced on the Internet for the purpose of transmitting more information and does not imply endorsement of its views or verification of the authenticity of its content. If the reprinted works infringe the author's right to authorize, or have other damages such