How to adjust the working parameters of the stone removal machine

This article will provide a detailed introduction on how to adjust the working parameters of the stone cutting machine. You may also want to know. Let's read on together.

Projection angle: The angle between the vibration direction of the screen body and the surface of the screen. The waveform of the stone removal machine screen shows linear reciprocating motion, and the vibration direction is inclined and perpendicular to the axis of the vibration motor. The vibration direction of the stone removal machine is different from that of the vibrating screen, so it cannot be changed. This is the basic condition for adjacent stones to move along the sieve surface near the sieve surface. Therefore, choosing the appropriate throwing angle to automatically classify materials and move stones adjacent to each other upwards. However, if the throwing angle is too large, the material often jumps off the surface of the sieve, which is not conducive to the upward movement of the gemstones side by side. The throwing angle is usually 30-35.

Amplitude and vibration frequency: Amplitude refers to the vibration amplitude of the screen body, and vibration frequency is an operating parameter indicating the vibration speed of the screen body. When the amplitude is large and the frequency is high, the material moves faster on the screen surface, and the automatic classification effect is stronger. Help improve separation performance and equipment performance. However, the amplitude is too large, the frequency is too high, the working surface vibrates violently, the material jumps, and the automatic classification of materials is damaged. Therefore, the separation performance decreases. On the contrary, the material moves slowly on the screen surface and the material layer becomes thicker, which is not conducive to automatic classification of the material. Not only does it affect cutting performance, but it also affects the performance of the stone removal machine. The amplitude of the stone removal agent is usually about 3.5-5 millimeters. The frequency of a stone removal machine driven by a vibration motor is usually not set, and the eccentric rotation frequency of the stone removal machine is proportional to its speed.

The above is the method shared by the editor on how to adjust the working parameters of the stone removal machine. We hope it can be helpful to everyone. Interested friends are welcome to follow the official website of Yongming Machinery.