Many challenges to be aware of in the application of stone removal machines

The application of stone removal machines is inevitable in the processing technology of wheat production and processing. How many issues should be noted in the application of stone removal machines? The editor has summarized the following content for everyone:

1. Independent wind net

The stone removal machine mainly relies on the action of wind to classify sand and wheat into grades. The height of wind and air pressure immediately determines the actual effect of removing stones. Therefore, it is necessary to equip an independent air network and select a suitable centrifugal fan according to the user manual to ensure that it has stable, sufficient exhaust volume and air pressure.

2. The screen mesh is severely damaged

After long-term use, the sieve mesh is worn away by hand woven wavy patterns, and the crushed stones are prone to deviation and flipping on the surface of the sieve, making it difficult to jump up and unable to be discharged uphill. This can easily flow into the wheat inlet and outlet with the material, which can damage the stone removal effect. At this point, please make sure to remove the sieve.

3. Tightness of connection between machines and equipment

There are conductive soft connections on the inlet, feed inlet, and air pipe of the stone removal machine. Once damaged, it will cause instability in the exhaust volume and air pressure of the machine, and immediately jeopardize the actual effectiveness of stone removal.

4. Is the circular mesh clogged

At this stage, most screening and stone removal machines use hand woven stainless steel mesh screens for their powder. After long-term use, residues such as steel nails and broken wires will be buried in the stainless steel sieve, blocking the circular hole sieve and endangering the actual effectiveness of stone removal. It is recommended to install a mineral processing equipment above the inlet of the stone removal machine.

5. The inclination of the screen surface should be moderate

If the inclination angle of the sieve body is too large, the gravel will be difficult to climb uphill and the stone discharge will become longer. A portion of the crushed stone will flow into the wheat inlet and outlet along with the wheat flow, which will reduce the efficiency of stone removal. On the contrary, the smaller the inclination angle of the sieve body, the easier it is for the gravel to climb up the mountain slope. In addition, higher quality barley also climbs to the quarry. Therefore, the inclination angle of the screening surface has a particularly important impact on the quality of the actual stone removal effect.

The above are the multiple challenges that exist in the application of stone removal machines that we will share today. We hope it can be helpful to everyone. See you in the next issue!