What should you pay attention to when using the polishing machine?

The polishing and polishing machine produced by Yongming Machinery of Bayannaoer City uses special polishing materials, which are durable and not easy to fall off, with low breaking rate and remarkable polishing effect. It can be arbitrarily connected in series to achieve multi-ply polishing. It can be installed on the production line or can be used independently. It is easy to operate and convenient to feed. The polishing machine is based on the rotation of the screw shaft, and the materials are displaced from each other during the fluidization process, and in the process, the cotton cloth fixed on the screw shaft rubs against each other to remove the soil on the surface of the material, so that the grain has a good polishing effect. The finish is good, especially for the beans that have been basically cleaned, and the quality of the grain is further improved.

First, to avoid the wires being crushed, pulled and worn

When the polishing machine works, it mainly passes through the power supply. If there are some problems in the power supply line, the machine will not operate normally. In serious cases, it will cause casualties. Therefore, be sure to pay attention to the protection measures of the power line when working.

Second, check the polishing pad for debris or yarn winding

The purpose of this is to prevent the belt from breaking, because if there are debris and yarn winding, it will increase the running resistance of the motor, which will increase the sound of the motor and eventually lead to the belt breaking. The above are some problems that the polishing machine should pay attention to when using it. Some people may think that these small problems are too small in the ordinary operation project, which is not enough to pay attention to, but when these small problems appear, they will cause great losses.

Reprint statement:

The article is reproduced on the Internet for the purpose of transmitting more information and does not imply endorsement of its views or verification of the authenticity of its content. If the reprinted works infringe the author's right to authorize, or have other damages such