How to adjust the working parameters of the stone remover

How to adjust the working parameters of the stone removal machine? Let's look at the editor to give you a detailed introduction, hoping to help you.

Throwing angle: refers to the angle between the vibration direction of the screen body and the surface of the screen body. The vibration form of the screen body is reciprocating linear vibration, and the vibration direction is inclined and perpendicular to the axis of the vibration motor. The vibration of the stone remover and the vibrating screen The direction is different and cannot be changed at will. This is the basic condition for the side-by-side stones near the surface of the screen body to extend along the surface of the screen body. Therefore, choosing a proper throwing angle is conducive to the automatic classification of materials and the upward movement of stones. But when the throwing angle is too large, the material will easily jump off the screen surface. On the contrary, the screen surface is not conducive to the side by side movement of the stone. The throwing angle of the stone remover is usually 30-35.

Amplitude and vibration frequency: Amplitude refers to the vibration amplitude of the screen body, and the vibration frequency is a working parameter indicating the vibration speed of the screen body. When the amplitude is large and the frequency is high, the material moves faster on the surface of the screen and separates automatically, and the effect of the grade is stronger. It is beneficial to improve separation efficiency and equipment output. However, if the amplitude is too high and the frequency is too high, the material will jump off due to the violent vibration of the working surface and the automatic classification of materials will be destroyed. Therefore, the separation efficiency is reduced.

However, the material moves slowly on the surface of the screen body, and the material layer becomes thicker, which is not conducive to the automatic classification of materials. Not only affects the separation efficiency, but also affects the output of the stone remover, the amplitude is usually about 3.5-5mm. Usually, the frequency of the stone remover driven by the motor is not adjusted, and the frequency of the stone remover that rotates eccentrically is proportional to its speed.

The above is about how to adjust the working parameters of the stone removal machine. Thank you for your attention and support. If you want to know more, please pay attention to the official website of Yongming Machinery. See you next time!