The basic principle of separating the raw materials in the specific gravity machine

The specific gravity machine is a machine equipment that screens according to the relative density difference between the raw material and the residue. The key structure of the machine equipment includes the sound card rack, wind, system software, vibration system software, gravimeter, etc. When the mechanical equipment is running, the raw materials are severely affected by wind speed and vibration friction. Under the action of the wind, the raw materials are suspended. In addition, vibration and friction make the solid layer lighter than the top. Then, the vibration of the stressed platform moves the lighter residue on the top layer downward, while the heavier commodity on the next layer is lifted, and the raw materials and residues are separated. This equipment is suitable for fine separation of particles with similar relative density. Compared with preliminary processing equipment such as proportional screening equipment and proportional cleaning concentrator, the accuracy is significantly improved, but the relative output is lower. The general discomfort is that raw materials can be produced and processed immediately without basic cleaning.

When the specific gravity machine works, the raw materials in the silo enter the middle of the board. Since the vibration and cyclone on the surface of the stainless steel filter screen are based on the hazard of the raw material layer, the porosity of the particulate matter increases, and the raw material is in a state of air transportation, thereby promoting automatic classification. The particles touch the surface of the display, and the small particles float to the top layer. Driven by force, moment of inertia and continuous cutting, it slides into the gate of the mesh valley. Using the moment of inertia and cyclone separator function of the stainless steel screen vibration system software, drag a large stone to the grate and move it to the selected area according to the polycrystalline stone.

According to the ratio of particles to gravel and the floating rate, the hydrometer extracts soil shoulder stones (similar to the particle size) from the particles. The specific gravity machine has a good stone removing effect, simple structure, small volume and low energy consumption. Except that the rate of marble floor tiles is above 95%, the rate of marble floor tiles is above 60%, and the rate of marble floor tiles is above 60%, the number of stone particles per kilogram does not exceed 100, and the others should be removed with a stone removal machine first. The principle is to extract particles from sand according to vibration, adjustment of cyclone dust collector and adjustment of inclination angle of stainless steel screen. The particles are composed of different particles and proportions of particles. When particles are subjected to vibration or under certain circumstances, they are classified into different levels according to their ratio, particle size, appearance and surface conditions. When the hydrometer is working, the raw materials in the feed bin enter the middle of the billet.

The above is about the basic principle of separating the raw materials in the hydrometer. I hope the content shared above can help everyone. Thank you for your attention and support. If you want to know more, please pay attention to the official website of Yongming Machinery. See you next time!