The key factors affecting the efficiency of cyclone dust collectors

A cyclone dust collector is also known as a cyclone separator. The principle is that the dusty gas enters the tangential inlet of the cyclone separator at a certain speed, and is collected and separated under the action of rotating centrifugal separation. The inlet wind speed is the key to the dust removal efficiency. What is the range of intake wind speed? Usually, our design wind speed is maintained at 18-23m/s. Below and above this value, it has a significant impact on dust removal efficiency.

1. When the wind speed is below 18 meters, and the wind speed has not reached a certain speed, the dust cannot rotate after entering, and centrifugal separation is not formed, greatly reducing the dust removal efficiency. When it is higher than 23 meters, the dust removal efficiency will also decrease, and excessive wind speed will cause dust to overflow from the outlet of the cyclone dust collector, leaving no time for sharing. At the same time, the resistance will greatly increase, so it is necessary to control the inlet speed of the cyclone dust collector within a certain range.

2. It has the characteristics of high dust removal effect and low resistance, and has been widely used in grinding machines.

3. This device has a better treatment effect on heavier dust, with lower treatment compared to lighter and fiber sawdust.

The above is about the key factors that affect the efficiency of cyclone dust collectors. We hope the above sharing can help everyone. Thank you for your attention and support. If you want to learn more, please follow the official website of Yongming Machinery. See you in the next issue!