Dust collector cooling method

       When using a bag filter, we will find that bag filters are usually used in high temperature environments, often encountering problems such as incineration, corrosion, wear and high concentration, so bag filters are used. When you need to do the necessary protection for the first time. Smoke can sometimes be as high as 550 degrees, many dust collectors can't adapt to this environment, and the Castle Peak environment offers you several ways to cool down:

       (1) Baghouse The medium used to cool high-temperature flue gas can use low-temperature air or water. It can produce some cold air and cold water. Whether it is cold or water cooled, it can be cooled directly. It can also be cooled indirectly. These are the cold winds that can help the smoke. The air is cooled and then the drop is warm.

       (2) Some low-temperature flue gas can be added as appropriate. If the temperature of the gas in the same dust removal system is inconsistent, it is preferable to first add a part of the low temperature gas to the high temperature in order to continuously add the cold air mixture gas. So that the temperature of the dust collector is not too high.

        (3) There is also a method of cooling the dust collector, that is, the installation of the cold air valve. A suction cooling valve after the installation of the cold air valve can be used in the bag filter to prevent high fumes from entering the bag. The dust collector is a butterfly valve with an adjustment function. One end is connected to the high temperature pipe and one end is open to the atmosphere. The regulator valve is operated by an automatic high temperature signal to control the amount of air drawn into the flue system, thereby reducing the temperature of the flue gas and adjusting it to a certain range.

Various cooling methods are available for a range of properties, and their characteristics are applicable to dust collectors of different temperatures and uses.

       When using a dust collector, the better condition is to fully equip the equipment so that the dust collector does not require better cooling when it needs cooling, and it does not cause the high temperature of the dust collector to be unacceptable and damage the dust collector.

       The above is the content that Xiaobian shared for everyone. If you want to know more, please pay attention to the official website of Yongming Machinery.

Reprint statement:

The article is reproduced on the Internet for the purpose of transmitting more information and does not imply endorsement of its views or verification of the authenticity of its content. If the reprinted works infringe the author's right to authorize, or have other damages such