Five points to note in the operation of the pulse dust collector

The operation process of the pulse dust collector is very important. After debugging the equipment, you can carefully ask the manufacturer about the startup sequence of the equipment and issues that need attention. In particular, the startup sequence must not be reversed to prevent the equipment from achieving the expected dust removal effect. The following is a detailed introduction for everyone.

1. Before starting, please check the preparations to understand the connection between the various components of the device and whether there is any dust or air leakage before starting.

2. This is important. The pulse dust collector cannot be started twice in succession. If the green indicator of the start indicator does not light up fifteen seconds after starting, check the power supply unit for faults and perform pulse dust removal. cleaning job.

3. For the induced draft fan of the pulse dust collector, before opening the induced draft fan, it is necessary to test the poppet valve and the bypass valve. When closing the component, one of them needs to be turned on to prevent the fan from starting, which may damage the device.

4. After the controller of the pulse dust collector is powered on, a prompt appears, and the digital tube will display the corresponding number. To adjust the pulse interval and pulse width potentiometer accordingly, please pay attention to adjustment and increase the interval and time width in a clockwise direction to keep the pulse dust collector in good working condition.

5. After the pulse dust collector is completed, check the filter bag. If it is damaged, consider replacing it. Clean the dust on the filter bag in time. Dust in the bucket also needs to be treated. Also check the tightness of each part for next use.

After reading this article, I believe that you have a more comprehensive understanding of the pulse dust collector. Then I will say goodbye to everyone here. If you need to share the products shared today, please call our company or visit the factory to investigate. , Interested friends, please continue to pay attention to the official website of Yongming Machinery, thank you for your attention and support! ! !

Reprinted statement:

This article is reproduced on the Internet for the purpose of conveying more information, and does not mean to endorse its views or confirm the authenticity of its content. If the reprinted work infringes the author's authorship, or has other damages such as copyright, portrait rights, intellectual property rights, etc., this is not intentional by this website, and will be corrected immediately after receiving the relevant right holder's notification.