Tel: +86 17310763143
E-mail: sales@nmgymjx.com
Website: www.nmgymjx.com
Address:The intersection of G242 and 311 roads, Langshan town, Linhe district, Inner Mongolia, China.
With the continuous development and improvement of dust collector technology, various new types of dust removal equipment are also continuously developed. However, due to its high dust removal efficiency and long-term stable dust emission concentration standards, the type of dust collector has developed rapidly and is becoming more and more popular among users. The following editors explain it in detail for everyone.
1. An important part of the dust collector is the dust bag, which plays a leading role. Therefore, the quality of the dust bag is also an important factor in the efficiency of the dust collector.
2. The dust layer on the surface of the dust collector bag has a great influence on the resistance of the dust collector, so the dust removal effect is very important.
3. There are many factors that affect the dust removal effect of the pulse dust collector, such as the blowing pressure, the dust removal cycle, the length of the dust collection bag, and the distance between the bags. Without sufficient blowing pressure and energy, the dust layer on the surface of the dust bag cannot be removed. However, the blow molding pressure should not be too large, otherwise the service life of the dust bag will be greatly shortened.
4. The injection pressure needs to be controlled within a reasonable range and needs to be flexibly adjusted to suit the viscosity of the dust. The injection pressure should be adjusted between 0.2 MPa and 0.4 MPa. From the perspective of reducing the running resistance of the dust collector, the resistance of the dust bag is always low in a clean state, which requires frequent purging and cleaning of the filter bag, but at the cost of the service life of the dust bag. Therefore, in actual operation, we need to flexibly adapt the cleaning cycle to the dust concentration and dust viscosity in the exhaust gas.
The above is the content that Xiaobian shared for everyone. If you want to know more, please pay attention to the official website of Yongming Machinery. At the same time, if there is any kind of mechanical shelling needs, please visit the factory.
De-impurity
Delivery of the wind for raw material
Dmс-160 type pulsed jet cloth filter
Grading screen
Polisher
De-stoner
Unbroken elevator
KTF4-3000 Sunflower seed hulling & separating machine
Ident cylinder sunflower seed cleaning machine
Product introduction of cyclone dust separator
Vertical hoist
Gravity separator
5XF-2000 type compound screening machine
KTF3-1200 Sunflower seed hulling & separating machine
KTF4-2800型葵花脱壳分选机