How to maintain the dust collector

How to maintain the dust collector? This is a very important question. The following editor will introduce how to use the vacuum cleaner and maintain it properly.

1. There are many types of dust removal equipment, with different models, specifications, structural performance and functional characteristics. Please read the instructions carefully before use, so as not to damage the industrial vacuum cleaner and cause danger to the user's safety due to improper use.

2. The ambient temperature of ordinary industrial vacuum cleaners should not exceed 40 degrees, the workplace should not be above 1000 meters above sea level, and there should be a good ventilation environment, and should not use air, flammable gas and corrosive in a dry indoor environment gas.

3. It is not allowed to use dry dust removal equipment to absorb water, and not to operate the vacuum cleaner with wet hands. If you need to clean a large paper ball, plastic cloth or waste that is larger than the diameter of the straw, you should remove it in advance, otherwise it will easily block the straw. When the industrial vacuum cleaner absorbs liquid substances, remove the filter element and pay attention to draining the liquid in time.

4. Connect the ground wire to ensure the safety of electricity. Ordinary industrial vacuum cleaners try to work continuously for no more than 8 hours each time, mainly to prevent the motor from overheating and burning. There is also a specially designed industrial vacuum cleaner. Due to the special heat dissipation system, the vacuum cleaner can work continuously for 36 hours without stopping, and can be used with machine tools.

5. When using an industrial vacuum cleaner equipped with an automatic winding device, please unplug the power cord for full use, and do not pull the power cord. If you see a yellow or red mark on the power cord, you must stop unplugging it immediately to prevent the power cord from being pulled too far. If you need to rewind the power cord, press the button to automatically rewind the power cord.

6. Do not over-extend and bend the industrial vacuum cleaner hose, and do not fold it frequently, which will affect the life of the industrial vacuum cleaner hose.

7. Check whether the power plug and power cord of the dust collector are damaged. Leakage will burn the motor of the industrial vacuum cleaner.

8. Be careful not to hit the dust collector, so as not to damage the barrel of the industrial vacuum cleaner and reduce the suction power of the industrial vacuum cleaner.

9. When the machine is not in use, please put it in a ventilated and dry place. For industrial vacuum cleaners that do not support long-term continuous work, the continuous working time should be controlled within the working hours supported by the industrial vacuum cleaner. Don't overload work, otherwise it will affect the service life of the industrial vacuum cleaner.

10. If the main body of the dust removal equipment is very hot, has a burning smell, or the industrial vacuum cleaner shakes and buzzes abnormally, it should be turned off and repaired immediately, and the industrial vacuum cleaner should not be overloaded.

The above is about how to maintain the dust collector. I hope it can help everyone. Thank you for your attention and support. See you next time!